A Radiant Barrier Pdoduct
* The ultimate home insulation product
* Holds Heat out during the summer
* Holds heat in during winter
* Cuts Energy Costs
* Easy to install
* Increases Comfort
* Lasts forever
* Money back Guarantee
Application and Design Support.
Where should our products be placed for optimum performance? Which product(s) should you consider? Rather than do it right the second time,
TCM is the ultimate wall insulation
If your new home or addition does not look like this before the exterior is applied, you will be paying too much for your comfort. The TCM6 product shown here wrapping the walls and roof of this new home allowed for a 50% reduction in the sizing of the A/C Units (7 tons instead of 14).
METAL BUILDINGS and SHEDS
TCM
installed on the inside walls and ceiling of a steel building or garage will
forever change how it feels inside.
This is the ultimate insulation product
for this type of construction.
This TCM user is air conditioning a steel building in Phoenix! No insulation of any kind is used in this building, only TCM. Insulation can only resists heat flow, TCM changes the direction of heat. What would you rather do in your home, building or addition?
TCM-4
Description: Four reflective surfaces (two metalized surfaces per
sheet), bonded to a separation scrim with a flame retardant
adhesive.
Applications: Wall systems, electric water heaters, pipes,
cisterns, roof insulation (with battens), metal buildings, duct insulation,
applications that are dust free, have vertical installations (interior/exterior
walls), or low temperature differentials (delta
T).
Sizes: 48" x 125' 500sq ft roll (custom sizes/printing available)
TCM-4R
Description: Two layers of membrane
with a measured emissivity of Exterior film layer is stronger and has a
fireproof, fiberbrous scrim bonded 100% to the film substrate. This offers
exeptional tear and abrasion resitance.
Applications: Use on inside of
steel buildings or buildings where the TCM will be visible. The reinforced
scrim is also designed for being stapled up under horizontal applictions such as
crawlspaces and under flat roofs to prevent tears or damage from staples or
other mechanical fastening hardware.
Sizes: 48" x 125'
500sq ft roll (custom sizes/printing available)
TCM-6
Description: Three layers of double sided reflective membranes
separated by two layers of 1/2" non combustable scrim.
Applcations: Used in
dusty, horizontal (attics), or between two areas of higher temperature
differential. Process manufacturing applications and refrigerated boxes,
walk-ins or freezers.
Available in 48"x125' rolls (500 square
feet) or 26" x 250' (500 square feet).TCM-6 26" is used for
use between structural supports installed 24" on
center.
TCM-6R
Description: Three layers of double sided membranes separated by
two layers 1/2" non combustable scrim with one outside layer of scrim bonded to
100% of the surface (Reinforced).
Custom configurations and designs available for any application you may have. Let us know what you are trying to accomplish.
ULTIMATE ATTIC INSULATION
Thermal Control Membrane installed in an attic with conventional framing. Simply roll it out like a carpet over the existing attic insulation to reduce heat gain and heat loss.
TCM is available in 26" wide for rolling out over existing insulation in attics between trusses, and 48" wide for wall, ducts, conventionally framed attics, steel buildings or anywhere you can imagine.
Wherever there is a penetration through the TCM simply cut around it with scissors and overlap. No taping or securing is needed.
Shown here is a 4" dryer vent coming up through the
ceiling.
Wrap your ducts in
our RBS Wrap product. Comes in
500 square foot rolls.
FROM
A RECENT TCM-6 CUSTOMER: 7/06
"Our
new Sante Fe home originally was
designed to have 14 tons of cooling per the specifications of the
architect. Two 5 ton units on each wing and a 4 ton unit to serve the
great room (with 14' high ceilings) and the kitchen.
Brad Lindsay of Horizon
Energy Systems encouraged us at a recent home show to have a plan review done on
the plans of our new home. Knowing a home of this size could have large
energy bills to keep it cool we decided to have this service done.
When
we received the modified plan back we were surprised to see the 14 tons of
cooling reduced to 7! 2 ton units were to replace the five ton units and a
3 ton mini split, to reduce the conventional 4 ton unit in the center of the
home. This reduction was made possible by wrapping the entire home in
Horizon's TCM6 product which impressed us from the day it was installed.
During the nights, even before the windows were installed, it was noticeably
more comfortable inside than a wooden building we use on the property for
storing construction materials. However, the real proof was when the 90+
degree weather hit and the electricity had not yet been connected. With
the windows and doors installed the inside temperature remained between 78 and
80 degrees all day! The shed outside was unbearable to be in and felt like
a convective oven! This product is just amazing and we are very impressed
not only with the product but the extensive knowledge of Brad Lindsay and
Horizon Energy Systems. The attic venting was re designed to keep the
hot air out, and look forward to reduced energy bills and a much more
comfortable home. Our only regret is building with frame this time around
and not employing the OPERA house that Brad designed. I
highly recommend the professional services and unique products of Horizon Energy
Systems.
J. Tatum/J. Escobedo Phoenix
Arizona